Operating Your Spa
Figure 15. Adjustable Therapy System™ seatside control
Pump On/Off
This button allows the user to turn on and off the ATS™ seat pump. Press this button once to turn the pump on.
Once on, the green LED light on the control panel will illuminate, indicating that the system is operational. To
turn off the pump, simply press the PUMP ON/OFF button a second time. Note: The pump must be on prior to
operating any other features of this system.
Pulse Mode
This button allows the user to turn the ATS™ massage control on and off. Press the pulse button once to turn on
the massage control. Once pressed, the orange LED in position number 1will come on, indicating the number
one pulse mode. Each press of either the up or down button will move the orange LED up or down to the next
pulse mode.
Note: Allow one second between each button press. Pressing the button quickly may cause improper operation.
To turn the pulse mode off and return to normal pump operation, simply press the PULSE MODE button a
second time.
Up
This button allows the user to cycle up from one through seven massage modes one at a time. Each mode offers
a different pulsating massage. Some modes are faster than others, so just cycle through them to find the massage
you like best.
Down
This button allows the user to cycle down through all seven massage modes, one at a time.
Demo Mode
After turning on the pump and pulse modes, press and hold both the UP and DOWN buttons together for two
seconds then release. In this mode, every 20 seconds this system will automatically switch to the next massage
2005 Spa Owner's Manual Page 39
8/1/2005