Operating Your Spa
2005 Spa Owner's Manual Page 41
8/1/2005
Using the Random Light Feature
1. Turn the spa light on by pressing the LIGHT button on the top-side control panel.
2. Cycle through the color range twice. After the last light from the second cycle has been lit, the random light
feature turns on and the spa light cycles through each individual light.
3. To turn the spa light off when not in use, press the LIGHT button.
The slow fade feature comes on right after the color white. The first color for the feature is green and then
slowly goes through the color spectrum. The last fade does the same thing as the slow fade, only faster.
Spa Cover
Important! Keep the spa covered when not in use!
• Covered spas will use less electricity in maintaining your set temperature.
• Covering your spa will protect your spa’s finish from the sun’s ultraviolet rays.
• You are required to keep the spa covered to maintain warranty coverage.
• Covering your spa helps prevent children from drowning in the spa.
See the manual enclosed with your cover for instructions on mounting the locks and how to lock and unlock the
cover.
In addition, while the spa cover is rigid, it is not designed to support any weight. Therefore, as a safety
precaution and to preserve the life of your cover, you must not sit, stand, or lie on it; nor should you place
objects of any kind on top of it.
Aromatherapy
This optional accessory is very easy to use. Simply unscrew the cap on the aromatherapy chamber and drop in a
bag of scented aromatherapy beads and replace the cap.
Waterfalls
Some spa series include optional waterfalls. When the booster pump is on, turn the knob near the waterfall.
Water will immediately start flowing through it.