Filter
Top Products
Operating Your Spa
NOTE: There is no control panel message displayed while in the standard heating mode, only the actual water
temperature is displayed.
To switch from the standard to the economy heating mode:
• Press either the UP or DOWN button followed by the LIGHT button.
• Press the same sequence to switch back to the standard heating mode.
Once in the economy heating mode, ECONOMY will display on the left side of the control panel.
Jets 1
Pump 1 Option or Spa Cal™ Filtration Option:
Press the JETS 1 button:
• Once to activate low speed or the Spa Cal™ filter pump
• Twice to activate high speed
• Three times to return to low speed
Jets 2
One Speed Pumps:
Press the JETS 2 button:
• Once to activate the high-speed pump
• Twice to turn off the high-speed pump
Two Speed Pump Option:
Press the JETS 2 button:
• Once to activate low speed
• Twice to activate high-speed
• Three times to turn off high-speed
Light
Page 16 2005 Spa Owner's Manual
8/1/2005