Filter
Top Products
CHAPTER 5: Configuration
83
• Default User Access: When enabled, this parameter allows TACACS users
to access the Outlet Managed PDU command mode without rst dening a
TACACS user account on the Outlet Managed PDU. When new TACACS
users access the Outlet Managed PDU command mode, they will inherit the
default Access Level, Port Access, Plug Access, Plug Group Access, Service
Access and Current/Power Metering parameters that are dened via the items
listed below: (Default = On.)
Access Level: Determines the default Access Level setting for new
TACACS users. This option can set the default access level for new
TACACS users to "Administrator", "SuperUser", "User" or "ViewOnly." For
more information on Command Access Levels, please refer to Section 5.4.1
and Section 17.2. (Default = User.)
Port Access: Determines the default Port Access setting for new TACACS
users. The Port Access setting determines whether or not the account will
be allowed to connect to the serial Setup Port. (Defaults; Administrator and
SuperUser = Always Enabled, User = Disabled.)
Note:
ViewOnly level accounts cannot be granted access to the
Setup Port.
Plug Access: Determines the default Plug Access setting for new TACACS
users. (Defaults; Administrator and SuperUser = All Plugs On,
User = All Plugs Off, ViewOnly = All Plugs Off.)
Notes:
• Administrator and SuperUser level accounts always have access
to all plugs.
• User level accounts will only have access to the plugs that are
defined via the "Plug Access" parameter.
• ViewOnly accounts are not allowed to invoke switching and
reboot commands.