Filter
Top Products
OUTLET MANAGED PDU
74
5.9.3.3. IP Security Examples
1. Mostly Closed: Access is denied by default and the only clients allowed, are
those explicitly listed in the Allow list. To deny access to all clients except
192.255.255.192 and 168.112.112.05, IP Security would be dened
as follows:
• Allow List:
1. 192.255.255.192
2. 168.112.112.05
• Deny List:
1. ALL
2. Mostly Open: Access is granted by default, and the only clients denied
access, are those explicitly listed in the Deny list. To allow access to all
clients except 192.255.255.192 and 168.112.112.05, the IP Security would be
dened as follows:
• Allow List:
1. ALL EXCEPT 192.255.255.192, 168.112.112.05
• Deny List:
1. 192.255.255.192, 168.112.112.05
Notes:
• When defining a line in the Allow or Deny list that includes several
IP addresses, each individual address is separated by either a
space, a comma, or a comma and a space as shown in Example 2
above.
• Take care when using the "ALL" wild card. When ALL is included
in the Allow list, it should always include an EXCEPT operator in
order to allow the unit to proceed to the Deny list and determine
any addresses you wish to deny.
5.9.4. Static Route
The Static Route menu allows you to type in Linux routing commands that will be
automatically executed each time that the unit powers up or reboots. In the Text
Interface, the Static Route menu is accessed via the Network Conguration menu. In
the Web Browser Interface, the Static Route menu via the Network Conguration
yout menu.