Filter
Top Products
OUTLET MANAGED PDU
58
5.6.2. Adding Plug Groups
The "Add Plug Group to Directory" option allows you to create new Plug Groups
and assign plug access rights to each group. The Add Plug Group function is only
available when you have accessed command mode using a password that permits
Administrator Level commands.
The Add Plug Group Menu can be used to dene the following parameters for each
new account:
• Plug Group Name: Assigns a name to the Plug Group. (Default = undened.)
• Plug Access: Determines which plugs this Plug Group will be allowed to
control. (Default = undened.)
Note:
After you have finished defining or editing Plug Group parameters,
make certain to save the changes before proceeding. In the Web
Browser Interface, click on the "Add Plug Group" button to save
parameters; in the Text Interface, press the [Esc] key several times
until the Outlet Managed PDU displays the "Saving Configuration"
message and the cursor returns to the command prompt.
5.6.3. Modifying Plug Groups
The "Modify Plug Group" function allows you to edit existing Plug Groups in order
to change plug access rights. Note that this function is only available when you
have accessed command mode using a password that permits Administrator Level
commands.
Once you have accessed the Modify Plug Group menu, use the menu options to
redene parameters in the same manner that is used for the Add Plug Group menu, as
discussed in Section 5.6.2.
Note:
After you have finished changing or editing parameters, make
certain to save the changes before proceeding. In the Web
Browser Interface, click on the "Modify Plug Groups" button to save
parameters; in the Text Interface, press the [Esc] key several times
until the Outlet Managed PDU displays the "Saving Configuration"
message and the cursor returns to the command prompt.