Filter
Top Products
OUTLET MANAGED PDU
82
5.9.9. TACACS Parameters
The TACACS Conguration Menus offer the following options:
• Enable: Enables/disables the TACACS feature at the Network Port.
(Default = Off.)
• Primary Address: Denes the IP address or domain name (up to 64 characters)
for your primary TACACS server. (Default = undened.)
• Secondary Address: Denes the IP address or domain name (up to 64
characters) for your secondary, fallback TACACS server (if present.)
(Default = undened.)
• Secret Word: Denes the shared TACACS Secret Word for both TACACS
servers. (Default = undened.)
• Fallback Timer: Determines how long the Outlet Managed PDU will continue
to attempt to contact the primary TACACS Server before falling back to the
secondary TACACS Server. (Default = 15 Seconds.)
• Fallback Local: Determines whether or not the Outlet Managed PDU will
fallback to its own password/username directory when an authentication attempt
fails. When enabled, the Outlet Managed PDU will rst attempt to authenticate
the password by checking the TACACS Server; if this fails, the Outlet Managed
PDU will then attempt to authenticate the password by checking its own internal
username directory. This parameter offers three options:
Off: Fallback Local is disabled (Default.)
On (All Failures): Fallback Local is enabled, and the unit will fallback to
it’s own internal user directory when it cannot contact the TACACS Server,
or when a password or username does not match the TACACS Server.
On (Transport Failure): Fallback Local is enabled, but the unit will
only fallback to it’s own internal user directory when it cannot contact the
TACACS Server.
• Authentication Port: The port number for the TACACS function.
(Default = 49.)