Black Box MPSH16-D20-120V Multi-tool User Manual


 
OUTLET MANAGED PDU
44
On - Callback ONLY (With Password Prompt): Callbacks will be
performed for accounts that include a Callback Number, and the username/
password prompt will be displayed when the user’s modem answers (users
will be required to re-enter their username/password when their modem
answers.) Accounts that do not include a Callback Number will not be able
to access command mode via modem.
Callback Attempts: The number of times that the Outlet Managed PDU will
attempt to contact the Callback number. (Default = 3 attempts.)
Callback Delay: The amount of time that the Outlet Managed PDU will wait
between Callback attempts. (Default = 30 seconds.)
Notes:
• After configuring and enabling Callback Security, you must then
define a callback phone number for each desired user account
(as described in Section 5.5) in order for this feature to function
properly.
• When using the "On - Callback (With Password Prompt)" option,
it is important to remember that accounts that do not include
a callback number will be allowed to access command mode
without callback verification.
5.3.5. Power Source Conguration
The Power Conguration menu allows you to adjust power measurements in order
to obtain a more accurate determination of how much "real power" is being used by
devices connected to the Outlet Managed PDU. Real Power is determined by the
following equation:
Real Power =
(Voltage * Amps) * Power Factor
Power Efciency
To dene Power Conguration parameters, access the command mode using an
account that permits access to Administrator level commands and then activate the
System Parameters Menu.
Notes:
• In the Text Interface, power source configuration parameters are
defined via the Power Configuration menu.
• In the Web Browser Interface, power source configuration
parameters are selected via the System Parameters menu.