Filter
Top Products
CHAPTER 17: Command Reference Guide
185
/P Set Serial Port Parameters
Displays a menu that is used to select options and parameters for the Outlet Managed
PDU’s serial Setup Port, Remote Port. Note that all functions provided by the /P
command are also available via the Web Browser Interface. Section 5.8 describes
the procedure for dening serial port parameters for the Setup Port.
Availability: Administrator
Format: /P [Enter]
/PL Set Plug Parameters
Displays a menu that is used to select options and parameters for the Outlet Managed
PDU’s switched outlets (plugs). Note that all functions provided by the /PL
command are also available via the Web Browser Interface. Section 5.7 describes
the procedure for dening plug parameters.
Availability: Administrator
Format: /PL [Enter]
/G Plug Group Parameters
Displays a menu that is used to View, Add, Modify or Delete Plug Groups. For more
information on Plug Groups, please refer to Section 5.6.
Availability: Administrator
Format: /G [Enter]
/N Network Port Parameters
Displays a menu which is used to select parameters for the Network Port. Also
allows access to the IP Security function, which can restrict network access by
unauthorized IP addresses. Note that all of the functions provided by the /N
command are also available via the Web Browser Interface. For more information,
please refer to Section 5.9.
Availability: Administrator
Format: /N [Enter]