Anritsu MG3642A Portable Generator User Manual


 
SECTION 4 OPERATING INSTRUCTIONS
4.9.5 Selecting the Memory Recall Mode
If you limit the memory contents to be recalled to frequencies only or frequency and output levels only, you can
execute high-speed memory recall, without changing other settings (modulation, for example).
Select a memory mode by following the procedure detailed below:
(1) Press the "Mem" [F5] key in the top menu to open the
"Memory Block Select" menu.
(2) Select "Recall Mode" by pressing the "" [F2] key or
"" [F3] key (the state is highlighted).
(3) Select a recall mode by the "Sel" [F1] key.
All : To recall all the panel settings
Freq : To recall frequencies only
Freq&Level : To recall frequencies and output levels