Filter
Top Products
SECTION 6 GPIB
6-38
6.7.3 AM subsystem
:AM[ :DEPTh] <Numeric> <AM term> or <Character>
Function Sets the AM depth.
Parameter <Numeric> = –100 to 100 %
<Character> = UP
DOWN
Unit <AM term>
(UP,DOWN: <None term>)
Restriction Modulation source porality can be changed by entering negative AM depth value.
:AM[ :DEPTh]?
Function Reads out the AM depth.
Response AM depth.
Restriction None
:AM:STATe <Boolean>
Function Turns ON or OFF the AM.
Parameter <Boolean> = ON or 1
OFF or 0
Unit <Non term>
Restriction None
:AM:STATe?
Function Reads out the state of AM.
Response AM = OFF
ON
Restriction None
:AM:SOURce <Character>
Function Selects the AM modulation source.
Parameter <Character> = INT1
INT2
INT3
EXT1
EXT2
Unit <Non term>
Restriction None
:AM:SOURce?
Function Reads the AM modulation source.
Response AM modulation source = INT1
INT2
INT3
EXT1
EXT2
Restriction None