Anritsu MG3642A Portable Generator User Manual


 
SECTION 6 GPIB
6-59
(7) Sweep
Because the sweep marker of the MG3641A/MG3642A is always on, the sweep marker ON/OFF switching
commands (SF4, SO4, SF5, and SO5) are invalid.
Stepping up (SF8 and SO8) and down (SF9 and SO9) cannot be done during manual sweep.
The sweep start point presets (SFA and SOA) and stop point presets (SFB and SOB) cannot be interchanged
because the MG3641A/MG3642A does not have an equivalent function.
The AF frequency sweep cannot be executed because the MG3641A/MG3642A does not have this function.
The memory sweep function cannot be interchanged because sweep parameters and memory are managed
completely differently.
(8) Memory
Because the MG3641A/MG3642A does not have a frequency memory, the command relating to the frequency
memory (FQ) cannot be interchanged.
(9) Other non-interchangeable functions
Commands relating to phase modulation cannot be interchanged because the MG3641A/MG3642A does not
have a phase modulation function.
The trigger program editing function cannot be interchanged because the trigger program is constructed differ-
ently.
Functions relating to SRQ are not interchangeable.