Filter
Top Products
© 2004 Alamo Group Inc.
Page 4 - 5
Interstater (NH TS-100A , 115A , 125A & 135A Asy. Manual) 06/04
Remote Control Cable Connections (Cab Tractor)
Screw the cover to the
Rubber Floor Mat with
the screws furnished.
Figure 14
Figure 15
4. Install Wire Harness through floor and
boot. The Wire harness will come to you with the on
/ off switches attached, these switches will need to
be removes to Push the Wire Harness up through
the floor and boot cover (See Figure 15 & 18).
5. Insert Cables up through Boot Cover. Mark
the cables as to which is which on the control valve
as they need to be connected in the same order on
the inside of the cab as they are connected to the
control valve (See Figure 17)
Remote Control Cable Connections Cab Tractor: (continued)
Wire Harness
Control cable
Cable Cover
Boot
Figure 16
Mark on Cable
to reference
which it is on
the control
valve
Figure 17
Figure 18
Switches unpluged and
removed to run up
through the Fllot and
boot cover