A SERVICE OF

logo

Open as PDF
next previous
C2630M-B (4/08) 235
5. Using your finger, reach behind the front panel and grab the filter assembly tag. Pull the filter assembly (1) out.
Figure 197. DX8100 Filter Tab Location
6. Remove the filter (2).
Figure 198. Removing the Filter
7. Do the following:
a. Using a can of compressed air, blow air from the back side of the filter through the front.
b. Verify that the filter is clean.
c. Use a cloth to remove dust from the filter bracket.
d. Insert the filter into the filter bracket.
e. Re-install the filter assembly.
8. Close the front panel door.
9. Start the DX8100 and resume operation.
POWER HDD
USB
POWER SWITCH
1
2