A SERVICE OF

logo

Open as PDF
next previous
C2630M-B (4/08) 179
• Click Cancel to exit the Exception dialog box and not save the changes.
Figure 155. Assigning an Exception to an ATM/POS Device
Verifying the ATM/POS Communication Connection
To verify that the ATM/POS connection is working correctly:
1. In the Network page, click the Port/Device tab. The Port/Device page is displayed.
2. In the Communication Port drop-down box, select a port (COM1 or Port 1 to Port 4).
3. In the selected device drop-down box, select an ATM/POS device.
4. In the Communication Port Configuration section, click Configure. The Device Configuration page is displayed.
5. Click the Diagnostics tab.
6. In the ATM/POS Information section, select the ATM/POS device in the Device ID drop-down box.
ᕤ
ᕥ