150 C2630M-B (4/08)
The following table describes the available options.
Configuring Advanced Video Loss-Activated Relay Output
To configure an advanced video loss-activated relay output:
1. On the DX8100 toolbar, click . The Setup dialog box opens to the Camera page.
2. In the Setup dialog box, click . The Schedule page is displayed.
3. Click the Configure Relays button. The Configure Relays dialog box opens.
4. Click the Video Loss tab if it is not already selected.
5. Configure each relay that is linked to an alarm:
a. Click the drop-down box to select a relay.
b. Select a relay time value from the Activation Period drop-down box.
Figure 130. Linking Relays to Video Loss
Table AM. ATM/POS-Activated Relay Settings
Option Result
Disable Relay will not activate when the ATM/POS event occurs.
Follow Event Relay will activate at the exact moment the ATM/POS event occurs.
1, 3, 5, 10,15, and 20 Seconds Sets the amount of time the relay will remain active after the ATM/POS event occurs.
ᕤ
5a
