A SERVICE OF

logo

Open as PDF
next previous
Preparing the Printers
3-136800-A2-GN22-30 January 1997
4. The memory card contains an emulator mode switch and two DIP switches. Figure 3-7
shows the location of the card in the printer and indicates the various switch settings.
To modify the emulator mode switch and the DIP switches, perform the following steps:
a. Set the emulator mode switch to Type F (see Figure 3-7).
b. Set the DIP switches to the positions indicated in Figure 3-7. Table 3-3 also indicates
the setting of each switch, as well as each switch’s function.
Figure 3-7. DX2300 — Memory Card Settings