Loading and Restoring Software
5-676800-A2-GN22-30 January 1997
23. The system prompts:
Please verify settings
Transport:
Interface:
Connector
I/O Address:
IP Address:
Subnet mask:
Hosts file path:
Are these settings correct (y/n/q)? [y]
PRESS: Enter
24. If the settings are not correct,
TYPE: n
PRESS: Enter
The system returns to Step 21.
25. If the settings are OK:
PRESS: Enter
26. The system responds:
Settings saved in file “C:\/XONE\/tcp.cfg”
Press any key to continue ...
PRESS: Enter
27. The system prompts:
Xsetup will need to copy the network driver ‘tcpnet.exe’ from the XONE diskette to
the C:XONE directory
Insert the disk labeled ‘Install’ in drive A:
Press Enter to continue of ‘q’ to Quit
PRESS: Enter
28. The system prompts:
XSetup will need to copy some additional files to go with your network files
Press any key to continue ...
PRESS: Enter
Searching archive for files. Please wait ...
Press any key to continue ...
PRESS: Enter
X-One Setup is now finished
