A SERVICE OF

logo

COMSPHERE 6800 Series Network Management System
5-28 January 1997 6800-A2-GN22-30
Initializing the NMS Database
CAUTION
This action destroys the database. Do not initialize the
database unless this is a first-time installation.
To install the 4.2 Release for the first time, you must create and initialize the NMS database. To do
this, perform the following steps:
1. TYPE: root
NOTE
You cannot initialize the database from any other login.
PRESS: Enter
TYPE: root password
PRESS: Enter
2. Once you are logged in,
TYPE: cd /usr/nms/adm
PRESS: Enter
Then,
TYPE: ./installDb
PRESS: Enter
NOTE
Do not reboot the system after executing InstallDb. The initialization
parameters will be lost. Rebooting should be done after the 6800
has been started up for the first time.