DEFINITY Enterprise Communications Server Release 5
Maintenance and Test for R5vs/si
555-230-123
Issue 1
April 1997
Maintenance Commands and Trouble-Clearing Aids
Page 8-412status conference
8
Parameters
Feature Interactions
None.
Output
Depending on the command entered, it is possible to have many records
display. Active conferences display first (in order of conference-ID), followed by
completed conferences (most recently completed first). There is no data or
information about conferences not yet begun.
The data for each conference displays in 2 parts: the first screen describes the
status of the conference and indicates the modes and levels of the conference. It
also shows certain endpoint information such as which endpoints are in use and
which endpoint caused the conference operating mode to change. This screen
is similar to the administration screens. The remainder of the screens display
endpoint level data (up to 8 endpoints per screen), displaying the ports and drop
reasons.
Screen 8-1
shows page 1 of a typical administration screen. The first screen
appears when status conference is entered and at least 1 valid conference is
found.
status conference Displays all stored conference data.
status conference 2 print Displays data on conference 2 (current or last
completed), and sends it to the SAT printer.
