DEFINITY Enterprise Communications Server Release 5
Maintenance and Test for R5vs/si
555-230-123
Issue 1
April 1997
Maintenance Commands and Trouble-Clearing Aids
Page 8-84clear port
8
clear port
This command removes the maintenance mark from a port.
Synopsis
clear port location
Permissions
The following default logins may execute this command: cust, inads, init, nms.
Examples
clear port 01c1102
Description
This command is used in conjunction with the "mark port" command. This
command will remove the mark from the port and allow it to be usable.
Parameters
Help Messages
If the system technician presses HELP after entering "clear port," the following
message will be displayed:
Enter 7 character port number
Error Messages
If the port is not administered, the following error message will be displayed:
Port not marked
If the command entered is in conflict with another currently executing command,
then a message will be displayed showing the login id of the conflicting user and
the conflicting command. The message is as follows:
’login id’:’command’ has a command conflict
location A "location" represents the physical position of the port to be busied
out and is entered as "UUcSSrr" where "UU" represents the cabinet
number, "c" represents the carrier, "SS" represents the slot position,
and "rr" represents the circuit (port). A single digit cabinet (1 - 9) may
be entered with or without a leading zero (0).
