Control panel message Description Recommended action
TRAY X
<TYPE> <SIZE>
Size specified by user
alternates with
TRAY X
<TYPE> <SIZE>
To change type
press
The printer is reporting the current
configuration of Tray X. The tray switch is
in the Custom position.
1. To change paper type, press .
2. Use
and to highlight the type,
then press
to select the type.
3. To change the paper size to Letter,
A4, Executive, B5 JIS, A5, or Legal,
leave the tray switch in the Standard
position.
4. To change the paper size to other
sizes, adjust the paper guides
against the paper, and close the
tray.
5. Select the paper handling menu from
the control panel. Configure the size
for the tray.
6. See
Configuring input trays for more
details.
Unable to mopy job
<JOB NAME>
A Mopy job cannot be mopied because of
a memory, disk, or configuration problem.
Only one copy will be produced.
No action necessary.
Unable to store job
<JOB NAME>
A job cannot be stored because of a
memory, disk, or configuration problem.
Install additional memory in the printer, or
install a disk drive into the printer. If a
disk drive is installed, delete previously
stored print jobs.
USE INSTEAD?
TRAY X:<TYPE> <SIZE>
The printer is offering a selection of
alternate paper to use for the print job.
1. Use and to highlight another
tray, and then press
to select the
tray.
2. Press
to return to the previous
tray.
Validating supplies
For menus press
alternates with
Ready
For menus press
A new cartridge has been installed and
the printer is determining whether it is an
HP or non-HP cartridge.
No action necessary.
Wait for printer to
reinitialize
Settings have been changed before the
printer automatically restarts, or external
device modes have changed.
No action necessary.
Warming up The printer is coming out of Powersave
mode. Printing will continue as soon as
warmup is completed.
No action necessary.
10.XX.YY SUPPLIES
ERROR
For help press
The printer cannot read or write to at
least one print cartridge memory tag, or
at least one memory tag is missing.
1. Turn the printer off and then back
on.
2.
Press
for more information.
3.
To exit help, press
.
4. If the error persists, contact
HP Support.
ENWW Control panel messages 131
