Control panel message Description Recommended action
REINSTALL <COLOR>
CARTRIDGE
alternates with
For help press
The cartridge is not fully seated. 1.
Press
for detailed information.
2. Follow the instructions on the display
to reinstall the cartridge.
3. Press
and to step through the
instructions.
4.
To exit help, press
.
REINSTALL SUPPLIES
alternates with
For status press
One or more cartridges are not fully
seated.
1. Press to display which cartridges
are not fully seated.
2. Follow the instructions on the display
to reinstall the cartridge(s).
3. Press
and to step through the
instructions.
4.
To exit help, press
.
REMOVE ALL
PRINT CARTRIDGES
To exit press
Cancel Job key
The printer is executing a Component
Test and the component selected is Belt
Only.
Remove all print cartridges.
After diagnostics are complete, reinstall
all print cartridges.
REMOVE AT LEAST 1
PRINT CARTRIDGE
To exit press
Cancel Job key
The printer is executing a Disable
Cartridge Check or Component Test
where the component selected is
CARTRIDGE MOTOR.
Remove one print cartridge.
After the test is complete, reinstall the
print cartridge.
REPLACE <COLOR>
CARTRIDGE
alternates with
For help press
The identified print cartridge has reached
the end of life. Printing will not continue
until the cartridge is replaced.
1.
Press
for help.
2. Follow the instructions on the display
to locate and install the missing or
incorrectly installed print cartridge.
3. Press
and to step through the
instructions.
4.
To exit help, press
.
Supplies ordering information is also
available from the embedded Web
server. See
Using the embedded Web
server for more information.
ENWW Control panel messages 127
