Control panel message Description Recommended action
INCORRECT <COLOR>
CARTRIDGE
alternates with
For help press
An incorrect cartridge is installed in a slot
and the cover is closed.
1.
Press
for help.
2. Press
and to step through the
instructions.
3.
To exit help, press
.
Incorrect PIN The wrong PIN was entered. Re-enter PIN correctly. After three
incorrect PIN entries, the printer will
return to Ready.
INCORRECT SUPPLIES
For status press
At least one supply item is incorrectly
positioned in the printer and another
supply item is missing, incorrectly placed,
out, or low.
1.
Press
and then press for help.
2. Follow the instructions on the display
to locate and replace the incorrect
supply.
3. Press
and to step through the
instructions.
4.
To exit help, press
.
Initializing This message is displayed when the
printer is turned on, as soon as the
individual tasks begin intialization.
No action necessary.
Initializing
permanent storage
This message is displayed when the
printer is turned on to show that
permanent storage is being made ready
for use.
No action necessary.
INSERT
TRAY X
For help press
Tray X must be inserted or closed before
the current job can be printed.
1.
Press
for detailed information.
2. Press
and to step through
instructions.
3.
To exit help, press
.
INSTALL <COLOR>
CARTRIDGE
alternates with
For help press
The cartridge is either not installed or not
correctly installed in the printer.
1.
Press
for help.
2. Follow the instructions on the display
to locate and install the missing or
incorrectly installed cartridge.
3. Press
and to step through the
instructions.
4.
To exit help, press
.
Install fuser
For help press
The fuser is either not installed or not
correctly installed in the printer.
1.
Press
for help.
2. Follow the instructions on the display
to locate and install the missing or
incorrectly installed fuser.
3. Press
and to step through the
instructions.
4.
To exit help, press
.
ENWW Control panel messages 119
