A SERVICE OF

logo

11.16
Removing and installing shaft sealing ring for
driver
If the intermediate flange has been removed, le-
ver out the sealing ring.
If the intermediate flange is installed, pull out the
sealing ring with an internal puller,
BMWNo.005010, and pressure head.
Pre-shape the sealing ring, which must be dry,
with the thumb and drive it in with drift,
BMWNo.111620, and handle,
BMWNo.005500.
Removing countershaft and layshaft
with freewheel
Pull countershaft and layshaft out of the engine
block together.
Note flat spring (1).
LT110140
00 5 010
1
LT110150