00.11
Key to maintenance intervals
– Inspection at 1000 km (600 miles)I
– BMW Service at 10,000 km (6000 miles))II
– BMW Inspection at 20,000 km (12,000 miles)III
– BMW Annual Service IV
Changing engine oil
Inspections I, II, III, IV
•
[RS] Remove lower section of fairing.
•
Change oil at operating temperature.
•
Oil drain plug (1).
•
Remove oil filter cover retainer (2).
•
Unscrew oil filter with special wrench
BMW No. 11 4 650.
L Note:
Coat sealing ring on new oil filter element with oil.
Screw in oil filter handtight, take note of hint at filter.
•
Replace O-ring in cover, if necessary.
X Tightening torques:
Oil drain plug................................................ 18 Nm
Cover to oil sump........................................... 6 Nm
Quantities:
Oil content ................................ 3.50 l (6.16 Imp.pt)
Oil content with filter change....... 3.75 l (6.6 Imp.pt)
See service data for oil grades................Seite 00.3
Changing oil in transmission
(gearbox)
Inspections I, III, IV
•
Drain off oil with engine at operating tempera-
ture.
•
Oil drain plug (1)
•
Oil filler plug (2)
L Note:
Renew sealing rings.
X Tightening torques:
Oil drain plug................................................ 20 Nm
Oil filler plug ................................................. 20 Nm
Quantities:
Oil filling capacity .................... 0.85 l (1.496 Imp.pt)
See service data for oil grades................Page 00.3
LT000010
LT000020
1
2
11 4 650
LT000030
2
1
