A SERVICE OF

logo

46.26
Disassembling and assembling main
centre stand
Detach tension springs (1).
Release screws (2) on left/right.
Release retaining ring (3).
Press out sleeve (4) on left/right.
Remove bearing block (5).
Loosen grease nipple (6).
Assemble in the reverse order of disassembly.
L Note:
Screws (2) are micro-encapsulated and must there-
fore not be re-used. Clean threades and holes and
fit screws with Loctite 243.
Lubricate sleeves with SHELL RETINAX A.
LT460370
1
6
5
1
2
3
4