A SERVICE OF

logo

21.12
Removing and installing clutch
thrust bearing
Remove rear wheel.
Remove exhaust system.
Detach clutch cable at clutch release lever (1).
Loosen retaining clip (2) at sealing gaiter.
Remove gaiter (3) with spring (4).
Remove thrust bearing (5) with pointed-nose
pliers.
Install in the reverse order of removal.
e Caution:
ABS rear wheel:
Check and, if necessary, adjust the sensor clear-
ance after installing the brake caliper.
Sensor distance:
Maximum distance..........................0.60...0.65 mm
............................................... (0.2362...0.25559in)
LT210100
1
5 4
3
2