Filter
Top Products
29
REF
NO.
PART No. DESCRIPTION Qty.
1 Spindle Assembly (Incl. 38-44) 1
2 Pulley Mounting Bracket 1
3 Hex Cap Screw, 3/8-16 x 1.75 2
4 Self Tapping Screw 4
5 Clevis Pin, .5 x 1.18 2
6 Belt Keeper Pin † 4
7 Clevis Pin, 3/8 x .75 2
8 Nylon Hex Lock Nut, 5/16-18 4
9 Nylon Hex Lock Nut, 1/4-20 † 4
10 Hex Flange Lock Nut, 3/8-16 11
11 Hex Nut, 5/16-18 1
12 Click Pin, .092 x 1.64 7
13 Internal Cotter Pin, .125 x 1.75
2
14 Belt Guard 1
15 Flat Washer, .531 x .93 x .09 2
16 Flat Washer, .38 x .93 x .11 4
17 Shoulder Screw, 3/8-16 2
18 Shoulder Spacer, .625 x .169 2
19 LH Support Tube 1
20 RH Support Tube 1
21 Hex Lock Nut, 1/4-20 1
22 Bell Washer.265 x .75 x .062 1
23 Hex Nut 1/4-20 1
24 Belt Keeper Rod 1
25 Idler Pulley 3.50 dia. 3
26 Idler Assembly Spacer 1
27 Flange Lock Nut 3/8-16 1
28 Idler Bracket
1
29 Hex Cap Screw, 3/8-24 x 2 1
30 Hex Cap Screw, 3/8-16 x 3 1
31 Spacer 3
32 Nylon Jam Lock Nut, 3/8-24 1
13
For parts and/or
accessories
please call
1-800-800-7310, or
1-330-220-4683
.
www.mtdproducts.com
Part List:
Snow
Thrower
Attachment
REF
NO.
PART No. DESCRIPTION Qty.
33 Hex Nut, 3/8-24 1
34 Extension Spring, .620 x 5.62 1
35 Lock Washer, 3/8 1
36 Idler pulley, 4” Diameter 1
37 Idler Pivot Arm 1
38 Flange Nut 5/8-18 2
39 Ball Bearing 2
40 Spacer 1
41 Deck Spindle Housing 1
42 Deck Pulley 7” 1
43 Pulley 3.75” 1
44 Spindle Shaft 1
45 Snow Thrower Support Brackets LH
† 1
46 Snow Thrower Support Brackets RH † 1
47 Shoulder Screw † 2
48 Hex Head Screw 3/8-16 x 1.00 † 4
49 Extension Spring .50 x 12.00 1
50 Clamp 16mm † 1
51 V-Belt † 1
52 Upper V-belt* 1
53 Upper V-belt* 1
54 Upper V-belt* 1
55 V-Belt 1
56 Hex Cap Screw, 5/16-18 x 1.75 1
57 Idler Pulley, Flat 2.75 OD 1
58
Pin 5/16-18
1
59 Wing Nut 5/16-18 † 1
60 Reflector 2
61 Double Idler Bracket Assembly 1
62 Extension Spring .91 x 7.33 1
63 V-Belt 1
64 Flat Washer
* Refer to the table on page 6 for your tractor’s applicable upper v-belt.
† Used only on the model 700-799 Series units