Filter
Top Products
25
13
REF
NO.
PART
NUMBER
DESCRIPTION Qty
1 Auger Gear Box (Incl. Ref. 23-41) 1
2 Impeller Assembly, 12” 1
3 Housing Assembly 1
4 Housing Brace Bracket 1
5 LH Spiral Auger 3
6 RH Spiral Auger 3
7 Hex Cap Screw, 5/16-24 x .75 2
8 Carriage Bolt, 5/16-18 x .62 10
9 Splined Carriage Screw 2
10 Self Tapping Screw 8
11 Bow-Tie Cotter Pin
8
12 Hex Nut, 5/16-18 6
13 Hex Nut, 5/16-24 2
14 Spirol Pin, 1/4 x 1-1/2 2
15 Flat Washer, .344 x 1.125 x .12 3
16 Bell Washer, .340 x .872 17
17 Hex Flange Bearing, .75 ID 2
18 Flange Bushing, .80 x .91 12
19 Skid Plate Bracket, 42” 1
20 Slide Shoe 2
21 Spacer, .75 x .125 x .5 4
22 Hex Bearing Housing, 1.0 2
23 RH Reducer Housing
1
24 LH Reducer Housing 1
25 Housing Brace Plate 1
26 Self Tapping Screw, 1/4-20 x .75 5
27 Spiral Axle, 41.5” 1
28 Hi-Pro Key, 3/16 x 5/8 1
29 Spring Spirol Pin, .25 x 1.25 1
30 Worm Gear, 20-tooth 1
31 Worm Shaft 1
32 Thrust Collar 1
33 Grease Plug 1
For parts and/or
accessories
please call
1-800-800-7310, or
1-330-220-4683
.
www.mtdproducts.com
Part List:
Snow
Thrower
Attachment
NOTE:
For painted parts, please
refer to the list of color
codes below. Please add
the applicable color code,
wherever needed, to the
part number to order a
replacement part.
For instance, if a part
numbered 700-xxxx is
painted powder black, the
part number to order would
be 700-xxxx-0637.
Yardman Green - 0665
Black - 0637
REF
NO.
PART
NUMBER
DESCRIPTION Qty.
34 Grease Seal 1
35 Flat Washer, .76 x 1.5 x .030 2
36 Flat Washer, .508 x 1.0 x .020 4
37 Thrust Washer,
.75 x 1.25 x .0615 2
38 Thrust Bearing, .75 x 1.25 x .078 1
39 Flange Bearing, .503 x .75 1
40 Flange Bearing, .75 x 1.0 x .59 1
41 Grease Seal 2
42 Chute Crank Assembly 1
43 Chute Crank Bracket 1
44 Chute Reinforcer
1
45 Splined Carriage Screw 2
46 Carriage Bolt, 5/16-18 x 1.5 1
47 Carriage Screw, 5/16-18 x 1.0 1
48 Screw, 1/4-20 x .75 4
49 Hex Index Washer Screw 1
50 Hex Cap Screw, 1/4-20 x .75 6
51 Nylon Hex Lock Nut, 1/4-20 10
52 Nylon Hex Lock Nut, 5/16-18 5
53 Spirol Pin, .125 x .82 1
54 Chute Flange Keeper 3
55 Lower Chute 1
56 Upper Chute
1
57 Adapter Chute 1
58 Chute Tilt Cable Guide 1
59 Plastic Bushing 2
60 Joint Block Assembly 1
61 Cable Bracket 1
62 Chute Crank Bracket 1
63 Flange Lock Nut, 5/16-18 6
64 Spacer 1.25 x .75 x 1.00 2
65 Sleeve .758 x 1.00 x 2.70 4
66 Shear Pin, .25 x 1.50 8