Filter
Top Products
27
REF
NO.
PART No. DESCRIPTION Qty.
1 Knob 1
2 Chute Tilt Handle 1
3 Chute Tilt Cable Guide 1
4 Nylon Hex Lock Nut, 5/16-18 22
5 Chute Tilt Bracket Assembly 1
6 Carriage Bolt, 5/16-18 x 1.5 2
7 Saddle Washer, .32 x .93 2
8 Plastic Bushing 1
9 Rubber Grommet , .44 x .94 x .5 1
10 Eye Bolt 1
11 Bell Washer, .340 x .872 1
12 Support Chute Tube 1
13 Cotter Pin, 3/32 x .75
1
14 Joint Block Assembly 1
15 Chute Crank Rod, .375 x 33 1
16 Chute Cable, 62” 1
17 Chute Cable w/ Clip, 62” 1
18 Rolled Pin, 1/8 x .63 1
19 Crank Knob 1
20 Push Cap, 3/8 ID 1
21 Rod, .375 x 11.375 1
22 Spirol Pin, .125 x .82 2
23 Rod Assembly 1
24 RH Support Plate Assembly 1
25 LH Support Plate Assembly 1
26 Lift Bracket Assembly 1
27 Hex Cap Screw, 5/16-18 x 1.50 2
28 Hex Cap Screw, 5/8-18 x 1.31 2
29 Hex Cap Screw, 5/16-18 x .75 4
30 Clevis Pin, .5 x .78 2
31 Slotted Hex Nut, 5/8-18 2
32 Hex Lock Nut, 3/8-16 4
33 Hex Lock Nut, 1/2-13 4
34 Cotter Pin, 1/8 x 1.25
2
35 Cotter Pin, .125 x .75 4
36 Snap Ring 1
37 Skid Plate 1
13
For parts and/or
accessories
please call
1-800-800-7310, or
1-330-220-4683
.
www.mtdproducts.com
Part List:
Snow
Thrower
Attachment
REF
NO.
PART No. DESCRIPTION Qty.
38 Flat Washer, .51 x 1.0 x .060 4
39 Flat Washer, .64 x 1.12 x .125 4
40 Bell Washer, .396 x 1.14 x .095 2
41 Drive Mounting Bracket 1
42 Shoulder Screw, .5 x .29, 3/8-16 2
43 Flange Bearing w/ Flats 2
44 Drive Pulley, 7” 1
45 Rod, 1/2 x 11.55 1
46 Link, 5.875 2
47 Link, 15.4 2
48 Link, 13.35 2
49 Heat Shield 1
50 Snow Thrower Lift Bracket
1
51 Hex Index Washer Screw #10-16 1
52 Pan Phillips Screw, #10-24 x .75 1
53 Hex Cap Screw, 5/16-18 x 1.75 2
54 Heavy Duty Spirol Pin, 1/4 x 1.5 1
55 Handle Grip 1
56 Cable Tie 5
57 Compression Spring 1
58 Flat Washer, .385 x .62 x .063 1
59 Flat Washer, .194 x .62 x .063 1
60 Lift Cable, 42” w/ Trigger Control 1
61 Lift Index Rod 1
62 Lift Handle Tube 1
63 Bearing Housing, 1.85 ID 1
64 Belt Cover 1
65 Hex Cap Screw, 3/8-16 x 1.0 8
66 Socket Head Cap Screw 1
67 Flange Lock Nut, 3/8-16 6
68 Square Key, 3/16 x .75 1
69 Hi-pro Key, 3/16 x .75 1
70 Right Angle Drive 1
71 Coupling
1
72 Flange Ball Bearing, .75 x 1.85 1
73 Belt Keeper Rod 1
* Refer to the table on page 6 for your tractor’s applicable upper v-belt.