Filter
Top Products
About Link 1000 Settings
34
F14 Test Control Panel Display
Default: Off
Range: On while the SET button is pressed when this
function is active. Off when
SET is released.
This function lets you confirm that the Link 1000 control
panel display is operating properly. When you press
SET in
F14 mode:
•The
RESET and DATA LEDs are orange-yellow.
• All other LEDs display their normal color.
• The Numeric Display reads 188.8.
The display returns to normal when you release
SET.
Operation of the
LOCK and FUNC LEDs is confirmed when
power is initially applied to the Link 1000.
F15 Display Software Revision Number
•Press SET to display the Software Revision Number.
This function displays the software revision number installed
in your Link 1000. Record this number on page 60 in case
you need to call Customer Service.
F16 Turn on Active Temperature Compensation
Default: Off
Range: Off, On
Turn this function On if your inverter/charger has a
temperature sensor.
Leave this function Off if you are not using a temperature
sensor.
When this function is On, the Link 1000 uses the actual
battery temperature reported to the Freedom Inverter/Charger
by a Heart TC2+2 unit, the Freedom 458 or the Freedom
Marine Inverter/Charger temperature sensor.