Filter
Top Products
About Link 1000 Settings
27
Changing the Power Share Setting
Power Share is a load management feature that helps to
prevent external source AC breakers from tripping when the
charger and a number of other loads all come on at once.
Power Share automatically reduces the charger output if the
loads exceed the Power Sharing current limit.
When you plug in to an external AC power supply, set the
Power Share level to the breaker size.
If your charger trips the shore power breaker, choose a lower
Power Share setting.
To change Power Share values:
1. Press and hold
SET until SEL appears.
2. Press the
CHARGE/PWR SHARE button. The present value
appears.
3. Press and hold
SET until the display begins scrolling
through other values.
4. Release
SET when the value you want appears.
Note: The CHARGE button LED must be on before you can
change Power Share values.