Filter
Top Products
VIKING
standard features
and operator specications
Accessible manual releases • Fail-Safe option sets the gate to automatically transfer
to a fail-safe mode in the event of a power failure, allowing the gate to be pushed
open without the use of special knowledge of the equipment • Fail-Secure option
sets the gate to mechanically lock in the event of a power failure, allowing no manual
movement without the use of the manual release • Standard Auto Open feature •
Elegant design, appealing to any architectural project • Plated and powder coated
1/4" steel chassis • Opening up to 120° • Operation speed of 13 to 16 seconds per 90°
• 100% duty cycle under very wide temperature range • Very low power consumption
• 300 cycles of operation on backup battery (600 lb. gate and 12' length) • Intelligent
speed control with smooth start and stop, self-adjust system • Modulated speed
regulator prevents exceeding operating speed that may reduce the service life of the
gate operator and/or installation • Intelligent obstruction detection with adjustable
sensitivity • Overlap delay that holds one gate momentarily by an adjustable time
while the other gate is operating (Master/Slave installation with overlap gates) • Built-
in protection against lightning strikes or similar electrical surges • Inherent overload
protection in the regulated power supply for external accessories with multiple
devices of protection • Modular connectors for easy installation •
Solar panel and low voltage wiring compatibility • LED
indicators for verication of operation
Viking Access Systems
Phone 800.908.0884 Fax 949.753.1640
631 Wald Irvine, CA 92618
www.vikingaccess.com