Filter
Top Products
MODEM USE WITH THE VORTEX
© Polycom, Inc. 25 Conference Composer User Guide
MODEM USE WITH THE VORTEX
CONFERENCE
COMPOSER
You will need Conference Composer version 1.62 or later. You can find the latest
version of the software on our website at www.aspi.com, on the Vortex page.
ON SITE WITH THE
VORTEX
At the local site with the Vortex, use Conference Composer to enable the modem to
auto answer:
1. On the O
PTIONS
page, choose the default initialization string from the I
NITIAL
-
IZATION
S
TRING
pull-down menu. If a default is not listed, enter the following
string:
ATE0F1&B1S0=2
2. Enable the initialization string by clicking on the E
NABLE
button.
3. Disconnect the RS-232 cable from the Vortex and connect it to your modem.
You may need to use a null modem for your modem. Connect your modem to the
Vo r t e x .
4. Cycle power on the Vortex. As it powers up, it will send the initialization string
to the modem. Make sure the modem is On before cycling power on the Vortex.
If you don’t have Conference Composer on site,
1. Using a terminal program, send the following strings to the Vortex:
F**MINISTRATF1E0&B1S0=2
F**MINI1
This will enter the initialization string and enable it.
2. Disconnect the RS-232 cable from the Vortex and connect it to your modem.
You may need to use a null modem for your modem. Connect your modem to the
Vo r t e x .
3. Cycle power on the Vortex. As it powers up, it will send the initialization string
to the modem. Make sure the modem is On before cycling power.
Figure 19. Modem settings on Conference Composer O
PTIONS
page.