Filter
Top Products
DEVICE PARAMETERS
Conference Composer User Guide 10 Technical Support: 800.932.2774
will send the desired string to the modem (or any device connected to the RS-232
port) each time the Vortex is reset (either through power-up or a software reset).
This allows the Vortex to put the modem into an Auto Answer Mode, and set the
baud-rate to 9600 bps. The default string is set to: ATE0F1&B1S0=2.
•N
ON
-V
OLATILE
M
EMORY
L
OCK
AND
P
ASSWORD
. Locking the Non-Volatile
memory will prevent users from overwriting presets that have been saved and
will also prevent the end user from changing the power up default preset.
•F
RONT
P
ANEL
L
OCK
AND
P
ASSWORD
. Locking the Front Panel will prevent
users from changing settings of the Vortex from the front panel LCD menu.
Users will be able to see what the settings in the device are, but will not be able to
change the device settings.
•M
ETER
D
ISPLAY
ON
THE
F
RONT
P
ANEL
. This parameter allows you to select
which input, output, or reference is displayed on the front panel meter.
•D
EVICE
N
AME
.
•D
EVICE
ID (when working off-line). The Vortex Device ID can be changed from
the O
PTIONS
page only if the device is off-line. To change the Device ID of an
online Vortex, you should change the Device ID from the front panel LCD menu
and then A
UTOSCAN
again.
•S
CREEN
S
AVER
TEXT
AND
OPTIONS
. The Screen Saver allows the designer to cre-
ate 4 sets of messages that can be displayed on the Front Panel LCD on the Vor-
tex. S
TART
T
IME
is how long after the last front panel button has been pressed
before the messages begin displaying. D
ELAY
T
IME
controls how much time
elapses before the next message is shown.