Filter
Top Products
MAINTENANCE
OM 0400-A
22
SHEAR
BOLT
MAINTENANCE
Shearbolt
Check the shearbolt indicated on the figure below
at frequent intervals for proper tightness to be sure
the debris blower is in safe working condition. If
the shearbolt needs replacement, use the
following part only
Driveline
Shearbolt M8 x 1.25 x 50mm gr. 6.6 with nut. Part
# 5RD4700060.
Provide adequate blocking before working
under the debris blower when in the raised
position.
Driveline
IMPORTANT: When the debris blower is not
used for more than two weeks, perform
driveline maintenance and always store it in a
dry place, away from bad weather conditions.
WARNING