John Deere BL1130 Blower User Manual


 
SECURITY - continued
OM 0400-A
9
MAINTENANCE
1. Park the tractor/ debris blower on level
ground, set the parking brake, disengage
the PTO, shut off the engine, remove the
key, and lower the implement to the ground
BEFORE making any debris blower
adjustments.
2. To avoid injury, do not adjust or service the
debris blower with the tractor engine
running. Making sure rotating components
have completely stopped before leaving the
operator’s seat
3. Always wear eye protection when cleaning
or servicing the debris blower.
4. Do not work under any part of the tractor or
debris blower, unless it is securely
supported by safety stands.
5. Make sure all shields and guards are
securely in place following all service,
cleaning, or repair work.
6. Do not modify or alter this equipment or
any of its components or operating
functions. If you have questions concerning
modifications, consult with your dealer.
TRANSPORTATION
1. If the tractor/ debris blower is to be driven on
public roads, it must be equipped with an
SMV (Slow Moving Vehicle) sign. Check
local traffic codes that may apply to unit
usage on public roads and highways in your
area.
2. Be alert for all other traffic when driving the
tractor/ debris blower on public roads or
highways.
3. Reference the Roadway Transport section
on page 19.
STORAGE
1. Before storing the debris blower, certain
precautions should be taken to protect it
from deterioration.
2. Clean the debris blower thoroughly.
3. Make all the necessary repairs.
4. Replace all Safety Signs that are
damaged, lost, or otherwise become
illegible. If a part to be replaced has a sign
on it, obtain a new safety sign from your
dealer and install it in the same place as on
the removed part.
5. Repaint all parts from which paint has worn
or peeled.
6. Lubricate the debris blower as instructed
under "Lubrication" section.
7. When the debris blower is dry, oil all
moving parts. Apply oil liberally to all
surfaces to protect against rust.
8. Attach driveline shield safety chain around
driveline by passing it over the upper hitch
9. Store in a dry place.