Filter
Top Products
ASSEMBLY
OM 0400-A
18
Removing Debris Blower from Tractor (Figure 7)
1. Set parking brake and turn engine off.
2. Direct the wheel supports (item 2) along the
housing support tube (as illustrated) and lock in
position with three round wire lock pins (item 1),
that are attached to the debris blower housing
(item A).
3. 3 point Hitch only: Detach upper arm by
removing linchpin and pin.
4. Disconnect driveline (item 3) from tractor and
attach the driveline safety chain (item 4) to the
housing support with the chain spring hook.
5. 3 point Hitch only: Carefully detach lower arms
from hitch pins by removing linchpins and loosen
anti-sway turnbuckles.
6. Quick Hitch only: Lift the two levers to release
lower hooks.
7. Lower the tractor 3 point system and slowly back
tractor away from the Debris Blower.
IMPORTANT
: To avoid damages to the debris
blower, retorque all bolts after the first 10
hours of operation.
Figure 7
A