Filter
Top Products
22
1 2
0
4 3
OPERATION HOMESAFE® PROGRAM
OPERATION FANMINDER™ PROGRAM
1. To operate the Home-Safe Program – Turn the
1 2
0
4 3
power button off for at
least 5 seconds.
2. Turn the
1 2
0
4 3
on. Immediately press and hold the "3" button for 5 seconds.
A series of tones will be heard through the piezo-buzzer indicating the
command has been accepted.
Note: This program overrides all manual control of lights and fan.
3. The lights will automatically cycled on and off in a controlled sequence as
follows: ON 1 hour, OFF ½ hour, ON 2 hours, OFF 1 hour, ON ½ hour then
OFF 2 hours. This seven hour pattern will repeat continuously so that a
different pattern of lighting is seen each day of the week.
4. 4) To cancel the Home-Safe Program, press the
1 2
0
4 3
Button OFF for ve
seconds.
The Fan-Minder feature will add to your comfort when used in the bedroom. The program
reduces the speed of the fan each two-hour interval to compensate for cooling night air.
1. To operate the lights for Light Minder Program – Turn the
1 2
0
4 3
power button off for
at least 5 seconds.
2. Turn the
1 2
0
4 3
on. Immediately press and hold the "2" button for 5 seconds. A
series of tones will be heard through the piezo-buzzer indicating the command
has been accepted. Once the lights turn on, they will automatically turn off after 2
hours.
3. The fan will respond with three descending tones. A timer is now initiated and the fan
will reduce one speed for each two-hour interval. The fan will not, however, descend
below the rst or the lowest speed.
4. You may increase the fan speed by pressing and holding any of the fan speed buttons until the desired
speed is reached, then release it. The fan will again reduce one speed for each 2 hour interval.
5. To cancel the Fan-Minder Program, turn the
1 2
0
4 3
OFF for 5 seconds.