Filter
Top Products
14
BLADE HARDWARE
BLADE INSTALLATION
Blades (5) Blade Irons (5) Medallions (5)
Blade Screws
(21)
Blade Iron
Screws (11)
Step 1. Insert the Medallion into the holes in the
Blade.
Step 2. Align the screw holes on the Blade Iron
with the holes in the Medallion.
Step 3. Insert 4 Blade Screws and tighten by
hand.
Step 4. Repeat steps for each Blade.
Step 5. Remove the Polyfoam ring from between
the bottom motor housing and Light Kit Mounting
Plate before installing the Blade Irons.
Step 6. Align the Blade Iron to 2 of the holes on
the Blade Iron Adapter on the bottom of the Fan.
Step 7. For each blade, insert one blade mounting
screw through the blade iron, and attach lightly to
the fan. Insert the second blade mounting screw,
then securely tighten both mounting screws.
Medallion
Blade
Blade Iron
Blade Iron
Adapter