Filter
Top Products
15
Veneto
™
LIGHT KIT HARDWARE
LIGHT KIT INSTALLATION
Lower Glass Light Kit
Light Kit Screw (3)
Lower Bulb (3)
Glass Cover
Finial
Step 1. To attach the Light KIt Mounting Plate
partially install two light kit screws into the switch
housing mounting plate.
Step 2. Connect the molex plug on the Light Kit to
the Fan.
Step 3. Align the keyhole slots in the Light Kit with
the light kit screws.
Step 4. Turn the Light Kit counterclockwise until the
light kit screws are rmly situated in the narrow end
of the keyhole slots.
Light Kit Screws
Step 5. Install the remaining screw into the Light
Kit.
Step 6. Tighten all three screws rmly.
Molex Plug
WARNING: Do not let wires
become lodged between Fan
Adapter and Light Kit.