Filter
Top Products
11
Veneto
™
Power From
Ceiling
Line Power
(IN)
Line Neutral
(IN)
White
Neutral From
Ceiling
Step 1. Locate the White Line Neutral (IN) and
connect it to the White Neutral Wire from your
ceiling using one of the supplied orange wire caps.
Step 2. Connect the Black Line Power (IN) and the
Black Power Wire from your ceiling with an orange
wire cap.
Step 3. Tuck the White and Black connected wires
back into the ceiling box through the hole in the
center of the Hanger Bracket while you slide the
Receiver into the open end of the Hanger Bracket as
shown.
NOTE: Ensure you do not tuck the bare ground
wire from the ceiling back into the box. This will be
connected later.
Bare Ground
Wire
Tuck Wires
in Box
WIRING HARDWARE
Receiver
Blue Wire Caps (4)
Orange Wire Caps (3)
WIRING
Blue -Downlight
Power
Black/White
Stripe-Uplight
Power
Step 4. Connect the Blue Downlight Power Wire
from the Receiver to the Blue Wire coming from the
fan with a blue wire cap.
Step 5. Connect the Black/White striped Uplight
Power Wire to the Black/White Wire coming from
the fan with a blue wire cap.