Filter
Top Products
13
Veneto
™
Step 9. Carefully tuck the wires around the
Receiver and Hanging Bracket as not to loosen the
wire caps.
Step 10. Insert 2 Canopy Screws into the Hanging
Plate diagonally across from each other so they
match the keyholes on the canopy.
Canopy Screws
Keyhole Slots
Step 11. Raise the Canopy over the Hanger Bracket.
Align the partially installed screws with the key slots
in the canopy.
Step 12. Twist the Canopy clockwise to secure.
Step 13. Install the third & fourth canopy screws in
the round holes on Canopy. Securely tighten all four
screws.
Step 14. Using both hands, push the Canopy Trim
ring up to the top of the Canopy.
Step 15. Twist the Canopy Trim ring clockwise to
secure it to the Canopy.
Keyhole Slot
Round
Hole
WARNING: Do not let wires
become lodged between
Hanger Bracket and Canopy.
CANOPY HARDWARE
SECURING THE CANOPY
Screw DriverCanopy Screw (4)