Filter
Top Products
Copying Data from the CW Menu
An easy method of entering frequency and power
level information into the current list index is to
copy the data from the CW menu.
Fisrt, go to the main List Sweep menu and press the
List Index soft-key to open the list index parameter.
Then, select the list index that you want the data to
be added to.
Next, press the CW soft-key. The CW Menu (below)
is displayed.
Use the Edit F1 and Edit L1 soft-keys to set the
frequency and power level to the values you wish to
enter into the current list index.
Press the Copy to List soft-key to copy the data to
the current list index.
Once the frequency and power level information has
been entered into the current list index, the list in
-
dex is incremented by one.
Selecting a
List Sweep
Range
Selecting a sweep range involves choosing a start
index and stop index for the list sweep.
To go to the Sweep Menu (below) from the main List
Sweep menu, press Sweep Menu .
This menu lets you select a list sweep range, set the
dwell-time-per-step, and go to the trigger menu.
3-46 681XXC OM
LOCAL (FRONT SWEEP FREQUENCY
PANEL) OPERATION OPERATION