Filter
Top Products
3-13 SYSTEM
CONFIGURATION
The system configuration function provides menus that let you set or
select instrument configuration items; for example, display intensity,
polarity of blanking and video marker outputs, RF on or off during re
-
trace or between steps, frequency scaling, GPIB operating parameters,
external interface language, and increment sizes for frequency, power
level, and time parameters. Use the System Configuration menu map
(Chapter 4, Figure 4-14) to follow the menu sequences.
To go to the System Configuration menu, first press SYSTEM .Atthe
System Menu display, press Config . The System Configuration Menu
(below) is displayed.
This menu lets you go to the Front Panel, Rear Panel, RF, GPIB, and
Increment Configuration menus.
3-80 681XXC OM
LOCAL (FRONT SYSTEM
PANEL) OPERATION CONFIGURATION