Filter
Top Products
4
Remove any lint accumulation from coin acceptor, including the optical switch.
Inspect and remove lint accumulation in customer-furnished exhaust duct work system and from
the dryer's internal exhaust ducting.
WARNING: THE ACCUMULATION OF LINT IN THE EXHAUST DUCT WORK
CAN CREATE A POTENTIAL FIRE HAZARD.
6 MONTHS
In the cleaning of the dryer cabinet, avoid using harsh abrasives. A product for the cleaning of appliances is
recommended.
B. Adjustments
Seven (7) Days After Installation and Every 6 Months Thereafter
Inspect bolts, nuts, screws (bearing set screws), nonpermanent gas connections (unions, shut-off
valves, orifices, etc..), electrical terminations, and grounding connections.
The 12-Rib 95" (J) poly belt arrangement should be examined. A cracked or seriously frayed belt
should be replaced. Tighten loose belts when necessary and check the alignment.
Complete operational check of controls and valves.
Complete operational check of all safety devices (door switches, lint compartment switches, sail
switches, burner and hi-limit thermostats.
C. Lubrication
The motor bearings, idler bearings and tumbler bearings are permanently lubricated. No lubrication
is necessary.