Filter
Top Products
Shipping
Guidelines
Follow the steps in Figure 1-3 to return the AFG to an Agilent Technologies
Sales and Support Office or Service Center.
* We recommend that you use the same shipping materials as those used in factory packaging (available from
Agilent Technologies). For other (commercially-available) shipping materials, use a double-wall carton with
minimum 2.4 MPa (350 psi) test.
Figure 1-3. Packaging/Shipping Guidelines
1. Prepare the module
• Remove user wiring from terminal block
• Attach tag to module that identifies:
• Owner
• Model Number/Serial Number
• Service Required
• Place tagged device in approved anti-static bag
2. Package the module
• Place packaged module in shipping carton*
• Place 75 to 100 mm (3 to 4 inches) of
shock-absorbing material around the module
• Seal the shipping container securely
• Mark the shipping container FRAGILE
3. Ship the module to Agilent Technologies
• Place address label on shipping carton
• Send carton to Agilent Technologies
Agilent E1445A Service Manual General Information 13