Chapter 18 Configuration: Port
GS1900 Series User’s Guide
99
Figure 80 Configuration > Port > PoE > PoE
The following table describes the labels in this screen.
Table 63 Configuration > Port > PoE > PoE
LABEL DESCRIPTION
PoE Setting
PoE Mode This field displays the power management mode used by the Switch, whether it is in
Classification or Consumption mode.
Edit Select this check box to enable a port. The factory default for all ports is enabled. A port
must be enabled for data transmission to occur.
Port Displays the port index number.
State Displays which ports can receive power from the Switch. You can set this in the
Configuration > Port > PoE Edit screen.
• Disable - The PD connected to this port cannot get power.
• Enable - The PD connected to this port can receive power.
Class This shows the power classification of the PD.
This is a number from 0 to 4, where each value represents a range of power (W) and
current (mA) that the PD requires to function. The ranges are as follows.
• Class 0 - Default, 0.44 to 12.94
• Class 1 - Optional, 0.44 to 3.84
• Class 2 - Optional, 3.84 to 6.49
• Class 3 - Optional, 6.49 to 12.95
• Class 4 - Reserved (PSEs classify as Class 0) in a switch that supports IEEE 802.3af only. Optional, 12.95 to
25.50 in a switch that supports IEEE 802.3at.
