Chapter 29 Configuration: AAA
GS1900 Series User’s Guide
185
29.2.2 The Auth Method Add/Modify Screen
Use this screen to configure the Auth Method settings. Click Configuration > AAA > Auth
Method > Add/Modify to open this screen.
Figure 165 Configuration > AAA > Auth Method > Add/Modify
The following table describes the labels in this screen.
29.3 RADIUS
29.3.1 The RADIUS Screen
Use this screen to configure the RADIUS settings. Click Configuration > AAA > RADIUS to open
this screen.
Table 147 Configuration > AAA > Auth Method > Add/Modify
LABEL DESCRIPTION
Auth Method
Name Enter the authentication method name. The name can be between 1 and 31 ASCII
Alphanumeric Characters.
Method 1 Select the first authentication method as being Local, Radius, or TACACS+.
Method 2 Select the second authentication method as being Empty, Local, Radius, or TACACS+.
Method 3 Select the third authentication method as being Empty, Local, Radius, or TACACS+.
Apply Click Apply to save the changes.
Cancel Click Cancel to discard the changes.
